Rainbow Electronics MAX1109 - Manual

For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.
General Description
The MAX1108/MAX1109 low-power, 8-bit, dual-channel,
analog-to-digital converters (ADCs) feature an internal
track/hold (T/H) voltage reference, clock, and serial inter-
face. The MAX1108 is specified from +2.7V to +3.6V and
consumes only 105µA. The MAX1109 is specified from
+4.5V to +5.5V and consumes only 130µA. The analog
inputs are software configurable, allowing unipolar/bipolar
and single-ended/differential operation; battery monitor-
ing capability is also included.
The full-scale analog input range is determined by the
internal reference of +2.048V (MAX1108) or +4.096V
(MAX1109), or by an externally applied reference rang-
ing from 1V to V
DD . The MAX1108/MAX1109 also feature
a software power-down mode that reduces power con-
sumption to 0.5µA when the device is not in use. The
4-wire serial interface directly connects to SPI™, QSPI™,
and MICROWIRE™ devices without external logic.
Conversions up to 50ksps are performed using either the
internal clock or an external serial-interface clock.
The MAX1108 and MAX1109 are available in a 10-pin
µMAX package with a footprint that is just 20% of an
8-pin plastic DIP.
Applications
Portable Data Logging
Hand-Held Measurement Devices
Medical Instruments
System Diagnostics
Solar-Powered Remote Systems
4–20mA-Powered Remote Systems
Receive-Signal Strength Indicators
Features
♦ Single Supply: +2.7V to +3.6V (MAX1108)
+4.5V to +5.5V (MAX1109)
♦ Low Power: 105µA at +3V and 50ksps
0.5µA in Power-Down Mode
♦ Software-Configurable Unipolar or Bipolar Inputs
♦ Input Voltage Range: 0 to V DD
♦ Internal Track/Hold
♦ Internal Reference: +2.048V (MAX1108)
+4.096V (MAX1109)
♦ Reference Input Range: 1V to V DD
♦ SPI/QSPI/MICROWIRE-Compatible Serial Interface
♦ V DD Monitoring Mode
♦ Small 10-Pin µMAX Package
MAX1108/MAX1109
Single-Supply, Low-Power,
2-Channel, Serial 8-Bit ADCs
________________________________________________________________ Maxim Integrated Products 1
1
2
3
4
5
10
9
8
7
6
SCLK
DOUT
DIN
CS GND
CH1
CH0
V DD
MAX1108
MAX1109
µ
MAX
TOP VIEW
COM REF
INPUT
SHIFT
REGISTER
CONTROL
LOGIC
T/H
SAR
INTERNAL
OSCILLATOR
OUTPUT
SHIFT
REGISTER
V DD
ANALOG
INPUT
MUX
INTERNAL
REFERENCE
DOUT
SCLK
DIN
CH0
COM
REF
CH1
CS
GND
CHARGE
REDISTRIBUTION
DAC
MAX1108
MAX1109
Functional Diagram
19-1399; Rev 0; 10/98
Pin Configuration
Ordering Information
PART
MAX1108 CUB
MAX1108EUB -40°C to +85°C
0°C to +70°C
TEMP. RANGE PIN-PACKAGE
10 µMAX
10 µMAX
MAX1109 CUB
MAX1109EUB -40°C to +85°C
0°C to +70°C 10 µMAX
10 µMAX
SPI and QSPI are trademarks of Motorola, Inc. MICROWIRE is a trademark of National Semiconductor Corp.