Advantech APAX-5060 - Manual

20-22
PC-based Controllers & I/O Modules
Specifications
General
ƒ Certifications CE, FCC class A
ƒ Dimensions 30 x 139 x 100 mm
(W x H x D)
ƒ Enclosure ABS+PC
ƒ Weight 195 g
ƒ Power Consumption 2 W @ 24 V
DC
(typical)
ƒ Status Display LED per channel
On: Logic level 1
Off: Logic level 0
Relay Output
ƒ Channels 12
ƒ Relay Type Form A (SPST)
ƒ Contact Rating 5 A @ 250 V
AC
/30 V
DC
(Resistive load)
ƒ Switching Capacity and Lifetime of the
Contact (For Resistive Load)
VDE:
30,000 operations (5 A @ 250 V
AC
,
10 operations/minute at 8° C)
70,000 operations (5 A @ 30 V
DC
,
10 operations/ minute at 85° C)
UL: 60,000 operations (5 A @ 250 V
AC
)
100,000 operations (5 A @ 30 V
DC
)
Mechanism: 20,000,000 operations
(no load, 300 operations/min)
ƒ Contact Resistance 30 m W (max.)
ƒ Insulation Resistance 1 G W (min.) at 500 V
DC
Protection
ƒ 2,500 V
DC
Isolation Between Channels and
Backplane
Environment
ƒ Operating -10 ~ 60° C
Temperature (when mounted vertically)
ƒ Storage Temperature -40 ~ 70° C
ƒ Relative Humidity 5 ~ 95% (non-condensing)
Ordering Information
ƒ APAX-5060 12-ch Relay Output Module
ƒ APAX-5001 1-slot Backplane Module
ƒ APAX-5002 2-slot Backplane Module
ƒ APAX-5343E Power Supply for APAX
Expansion Module
APAX-5060 APAX-5046
Specifications
General
ƒ Certifications CE, FCC class A
ƒ Dimensions 30 x 139 x 100 mm
(W x H x D)
ƒ Enclosure ABS+PC
ƒ Weight 165 g
ƒ Power Consumption 2.5 W @ 24 V
DC
(typical)
ƒ Status Display LED per channel
On: Logic level 1
Off: Logic level 0
Digital Output
ƒ Channels 24 (Sink Type)
ƒ Voltage Range 8 ~ 35 V
DC
ƒ Rated Current Output 0.5 A (per channel, at signal
"1")
ƒ Leakage Current 0.1 mA (at signal "0")
ƒ Switch Rate: Resistive load: 300 Hz (max.)
Inductive load: max. 20 Hz
(max.)
Lamp load: max. 200 Hz
(5W lamp and under 50
W,
24 V)
Protection
ƒ 2,500 V
DC
Isolation Between Channels and
Backplane
ƒ Short Circuit Protection
ƒ Thermal Shutdown Protection
Environment
ƒ Operating -10 ~ 60° C
Temperature (when mounted vertically)
ƒ Storage Temperature -40 ~ 70° C
ƒ Relative Humidity 5 ~ 95% (non-condensing)
Ordering Information
ƒ APAX-5046 24-ch Digital Output Module
ƒ APAX-5001 1-slot Backplane Module
ƒ APAX-5002 2-slot Backplane Module
ƒ APAX-5343E Power Supply for APAX
Expansion Module
APAX-5046
APAX-5060
APAX-5080
24-ch Digital Output Module
12-ch Relay Output Module
4/8-ch High Speed Counter Module
RoHS
COMPLIANT
2002/95/EC
RoHS
COMPLIANT
2002/95/EC
Specifications
General
ƒ Certifications CE, FCC class A
ƒ Dimensions 30 x 139 x 100 mm
(W x H x D)
ƒ Enclosure ABS+PC
ƒ Weight 170 g
ƒ Power Consumption 2.5 W @ 24 V
DC
(typical)
ƒ Status Display LED per channel
(for DI, DO channel)
On: Logic level 1
Off: Logic level 0
Counter/Frequency Input
ƒ Channels and Mode 8 (Up and Frequency mode)
4 (Pulse/Direction, Up/Down,
A/B phase mode)
ƒ Counting Range 32-bit + 1-bit overflow/
underflow
ƒ Minimum Pulse Width 1 μs
ƒ Counter Frequency 1 MHz (max.)
ƒ Input Voltage For "0" signal: 0 ~ 3 V
DC
For "1" signal: 10 ~ 30 V
DC
Digital Input
ƒ Channels 4
ƒ Type Source Load
ƒ Input Voltage For "0" signal: 0 ~ 3 V
DC
For "1" signal: 10 ~ 30 V
DC
Digital Output
ƒ Channels 4 (Sink Type)
ƒ Output Voltage Range 8 ~ 35 V
DC
ƒ Rated Output Current 0.5 A (per channel)
Protection
ƒ 2,500 V
DC
Isolation Between Channels and
Backplane
ƒ Over Voltage Protection (For DI and counter
channel)
ƒ Short Circuit Protection (For DO channel)
ƒ Thermal Shutdown Protection (For DO channel)
Environment
ƒ Operating -10 ~ 60° C
Temperature (when mounted vertically)
ƒ Storage Temperature -40 ~ 70° C
ƒ Relative Humidity 5 ~ 95% (non condensing)
Ordering Information
ƒ APAX-5080 4/8-ch High Speed Counter
Module
ƒ APAX-5001 1-slot Backplane Module
ƒ APAX-5002 2-slot Backplane Module
ƒ APAX-5343E Power Supply for APAX
Expansion Module
APAX-5080 RoHS
COMPLIANT
2002/95/EC