Dual Electronics XDMA6630 - Manual (Page 25)

25
Bluetooth
®
Operation
XDMA6630 OPERATION
The XDMA6630 supports A2DP (advanced audio distribution profile) wireless streaming
audio from your Bluetooth mobile device directly to your head unit. You can also control
your music from the front panel of the head unit using AVRCP (audio video remote control
profile).
Notes:
• To stream music to your head unit, your mobile device must support the A2DP and
AVRCP Bluetooth profiles. Check the owner's manual of your mobile device for details.
• Streaming audio must be enabled from your mobile device. This option will vary
depending on the device. Some devices allow streaming audio to be disabled.
After pairing, connecting and enabling streaming audio from a compatible mobile device,
begin playing music using the music player on your mobile device. Once the music is
playing, the following functions can be used to control the music:
• The ll button will skip to the next available audio track.
• The
nn
button will skip to the previous audio track.
• The
l
/ II button will toggle between play and pause during playback.
• The button will stop the audio playback.
Note: Some Bluetooth devices may not fully support these commands.
Bluetooth Reset
Resetting the Bluetooth module will remove the list of paired phones and delete the list of
recent calls from memory.
To reset the XDMA6630's Bluetooth feature, perform the following steps:
1) Press MODE until the head unit is in Bluetooth mode.
2) Press and hold MODE for 3 seconds to reset the Bluetooth settings back to the factory
default.
Bluetooth Streaming Audio Operation
(Bluetooth Audio Mode)