Dual Electronics XHD6425 - Manual (Page 8)

8
XHD6425 OPERATION
Press rotary encoder momentarily to select between
Volume (default), Bass, Treble, Balance, & Fader.
Press rotary encoder until BAS appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Press rotary encoder until TRE appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Press rotary encoder until BAL appears then rotate encoder
left/right to adjust (BAL L 1-BAL 00-BAL R 1).
BAL 00 represents equal balance
Press rotary encoder until FAD appears then rotate encoder
left/right to adjust (FAD F 1-FAD 00-FAD R 1).
FAD 00 represents equal fader
Individual Bass and Treble settings are retained in memory
for AM, FM, CD, AUX, USB and Bluetooth modes. This allows
you to save the Bass and Treble settings separately for each
mode.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
Audio
Bass
Treble
Balance
Fader
Source Audio Memory
General Operation
BASS VOLUME TREBLE BALANCE FADER