American Car Craft Corvette Brake Booster Cover Polished 2005-2008 C6 - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
C6 CORVETTE POLISHED BRAKE BOOSTER COVER (fits 2005-2008)
PART# 043011
patent pending
PARTS INCLUDED:
1-Stainless Brake Booster Cover
2-Chrome Nut Covers 120 NC
Your new accessory comes to you with a clear protective liner. This liner will help to
keep your new parts clean during installation. You will be instructed when to remove the
liner during the detailed installation.
1. Remove the two 10mm nuts securing the water tank and lift it out of its position
and rest it over the alternator temporarily.
2. Remove the vacuum line and the two nuts securing the master cylinder. Pull the
master forward off the two bolt studs.