American Car Craft Corvette Side Vent Grilles Perforated 2Pc 2006-2013 Z06 only User Manual
Page 2
2. Now that you have created access to the vent hole itself the next step will be to
prepare two areas for attachment. Using a paper towel scrub the two inner sides of
the vent hole with alcohol to remove any road grime or dirt. Then wipe away any
residue with a fresh paper towel. Once this is done swipe the areas with the
adhesive promoter provided. NOTE: This promoter is NOT a cleaning agent. Do
not use it to clean the surfaces. It is a BONDING agent that will insure the grilles
attachment long term.
3. Although your new grilles come to you pre shaped it WILL be necessary to
further shape each grille by hand in order to achieve a nice contoured fit. You
may need to set the grilles in position with every adjustment several time before
you get them just right so BE patient. In this process you will also be training
yourself how to place the grilles for the peel and stick installation.
4. Once you have achieved a nice contoured fit simply peel the red release liner from
the grille completely and then carefully set the grille in position. Press the
attachment tape to the fender on the inside as you apply pressure with you fingers
from the outside of the fender to create a nice bond. Once you have set the grille
simply press the inner fender back in place and then reassemble the fender liner to
complete the installation. INSTALLATION FOR Z06: The Z06 fender has a
wider shape to it. This shape will cause a space between the outer grille tab and
the inner wall of the fender so no direct contact will occur at this point. You have
been provided with an additional bracket to be installed directly to the fender wall
and up against the grille this will secure the grille and will prevent it from being
able to be pushed back into the vent hole once the bracket has been mounted.
If any questions occur during installation please
contact American Car Craft at 727-861-1500.
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520
www.americancarcraft.com