You have only one shot at this so go slowly – American Car Craft Corvette Doorsills Executive Series Polished with Carbon Fiber Corvette Inlay Outer 2Pc 2005-2013 C6 User Manual
Page 2
1. Thoroughly clean the surface first with soap and water then with household
isopropyl alcohol.
2. Then swipe the same area with the adhesive promoter (provided). This promoter
will guarantee a good permanent bond.
3. When you are satisfied with the fit, remove the red liner from the attachment
tape, reposition your new sill and press firmly.
IT IS VERY IMPORTANT THAT YOU SLOWLY INSERT THE SILLS INTO PLACE. THE
ATTACHMENT TAPE IS VERY RELIABLE AND IT MIGHT BE A GOOD IDEA TO MAKE A
COUPLE OF TEST FITS BEFORE PULLING THE RED LINER!
YOU HAVE ONLY ONE SHOT AT THIS SO GO SLOWLY!
4. Once in place remove the protective liner. Repeat steps 1-5 for the opposite
doorsill.
If you have any questions during installation please call American Car Craft at 727 61-
1500. Thank you and enjoy your new purchase.
American Car Craft LLC
18924 Sakera Rd Hudson, FL. 34667
Ph 727.861.1500 Fax 727.861.1520