American Car Craft Corvette Doorsills Outer w_Chrome Ribs 2Pc 2005-2013 C6 - Manual

AMERICAN CAR CRAFT INSTRUCTION
C6 Corvette Doorsills
Part #041014
patent pending
PARTS INCLUDED:
2-Stainless Doorsills
2-Adhesive Promoter
2-1/8” Chrome Molding Strips
PLEASE NOTE THAT THIS IS A PERMANENT INSTALLATION AND THE NEW DOORSILLS
CANNOT BE REMOVED WITHOUT DAMAGING THE PART. PLEASE NOTE YOUR CAR WILL
NOT BE DAMAGED IN ANY WAY.
Your new doorsills come to you with a protective liner that you will remove after installation. This will help
produce a nice clean install.
1. Thoroughly clean the surface area first with soap and water then with household isopropyl alcohol.
2. Then swipe the same area with the adhesive promoter (provided). This promoter will guarantee a good
permanent bond.
3. THIS STEP IS VERY IMPORTANT!!! Gently pre-bend the sills to fit. The metal is flexible enough
to allow you to gently curve it so that the sills fit and conform to the door area without forcing it to
lay flat. You want the doorsills to look like they are attached (to conform to the shape of the car
without any of the doorsill sticking up from the car) to the car before you actually remove the red
liner.