American Car Craft Corvette 5th Brake Light Trim Crossed Flags Style Polished 2005-2013 C6 all User Manual
American Car Craft For the car
AMERICAN CAR CRAFT INSTRUCTION
CORVETTE 5TH BRAKE LIGHT CROSS FLAG
PART#042115
PARTS INCLUDED:
___1-Stainless Brake Light Bezel
1. Thoroughly clean the surface of the factory brake light lens with alcohol to remove any
and all dirt and wax. Test the surface by applying a strip of masking tape to see if the
surface has been cleaned enough to achieve a tack. If the masking tape sticks then swipe
the lens with the adhesive promoter provided. WARNING some factory lenses have
been found to react to the adhesive promoter and may leave an ashy finish. In order to
avoid this try to apply the adhesive promoter only to the thin area to be mounted with the
bezel and not to the main body of the lens. Or if you can be very certain that you have
removed the entire surface contaminates you can then mount the new light bezel without
using the adhesive promoter if you prefer. Before you permanently attach the bezel it is
important to shape the new bezel by hand so that it exactly matches the shape of the