American Car Craft HHR Firewall Brushed w_Cap 2006-2012 User Manual
Page 3
You have been provided with four flat screw covers. Apply a tiny amount of instant
adhesive to each cap then press them into the four screws. Remove the protective liner
then reassemble the engine bays components.
8. You have been provided with a decorative chrome cover for the brake fluid cap. To
install this cover simply scrub the top of the factory cap with alcohol then swipe once
with the adhesive promoter pad provided. You will notice an attachment cookie on the
underside of the new cover. Simply remove the cookie half and attach it to the cap you
just prepared. The cover has been shaped to compensate for the angle of the cap.
Simply set the new cap to its best position.
Note: Care must be taken when cleaning your covers. It is a good idea to lightly dust
your covers with a clean soft cloth first in order to prevent any particles from scratching
them. Then wipe (using a new clean soft cloth) with a good quality streak free glass
cleaner.
If any questions occur during installation, please contact American Car Craft at
727-861-1500.
Thank you and enjoy your new purchase.
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520