American Car Craft Corvette Vent Spears w_Perforated Front Vents 6Pc Polished 2006-2013 Z06 only User Manual
Page 2
1. Clean the painted surface just in front of the black factory plastic side vents
and the horizontal vent ribs with household isopropyl alcohol to remove all dirt
and wax. Once this is done swipe the painted area once with the adhesive
promoter provided to the area horizontal to the vent rib where the spears will
be mounted.
2. Place each spear in position to check the fit and also to get acquainted to just
where they sit. Once you have a good idea as to their positioning apply a full
dab of 100% clear household silicone to the inside of each spear so that the
silicone will come in contact with the plastic vent rib. Peel the red release liner
from each spear and firmly press them into position making sure they sit nice
and straight.
3. Let dry for 24 hours.
If any questions occur during installation please call American Car Craft at
727-861-1500.
Thank you and enjoy your purchase!
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520
www.americancarcraft.com