American Car Craft Challenger SRT 8 Firewall Polished w_cap 6.1L 2008-2010 User Manual
Polished stainless false firewall 6.1
Advertising
AMERICAN CAR CRAFT INSTRUCTIONS
POLISHED STAINLESS FALSE FIREWALL 6.1
PART #153011
patent pending
PARTS INCLUDED:
___ 1-Slightly Angled Extension Bracket
___ 1-¼-20 nut and ¾” Bolt
___ 2-Chrome ¾” Oval Head Screws
___ 1-Decorative Chrome Cap Cover w/Velcro Cookie for SRT 8 Models
Only
___1-Adhesive Promoter Pack for SRT 8 Models Only
PLEASE READ ENTIRE INSTRUCTIONS BEFORE BEGINNING INSTALLATION!
Your new firewall comes to you with a protective liner. Do not remove liner
until step 4.
1. Remove engine cover.
2. You will notice a large vacuum valve bolted to the shock tower just to
the left side of your engine bay. (Passenger side) Unbolt this valve
and use the same bolt to attach the extension bracket (provided).
Advertising