American Car Craft Corvette Chrome Button Screw Cover 60Pc Kit 2005-2013 C6 all - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
C6 CORVETTE CHROME BUTTON KIT
PART#041030
Your kit comes to you with 60 chrome buttons and 60 sockets. This is more then
you will need to complete this application. Save any extra parts in case you lose
one. You have a choice of installation methods. You can either use method one
or method two.
Method 1(PREFFERED METHOD)- The entire application can be done easily
and securely by applying a small dab of clear household silicone from a small
squeeze tube and gently place chrome cap into position. Be careful not to apply
too much silicone as it will tend to ooze out of the sides. If this does happen
leave it alone to dry. Once dry any excess can be pulled away cleanly.
OR IF YOU PREFER
Method 2- You have been provided with 60 white snap sockets. Simply remove
the screw you are going to cover with a T15 torx driver and slip it thru the white
socket, replace the screw being careful not to over tighten. Then snap the
chrome cover in place. Be sure that it snaps in place. However some of the
screw heads may be too large for the socket, in this situation either replace the
screw with one that will fit the socket or simply use method one and silicone cap
in place.
If any questions occur during installation please contact American Car Craft at
727 861-1500. Thank you and enjoy your purchase!
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520