American Car Craft Corvette Doorsills Outer Stock Pad Inserts 2Pc 2005-2007 C6 - Manual

AMERICAN CAR CRAFT INSTRUCTION
C6 Corvette Doorsills
Part #041017
patent pending
PARTS INCLUDED:
2-Stainless Doorsills
2-Adhesive Promoter
PLEASE NOTE THAT THIS IS A PERMANENT INSTALLATION AND THE NEW DOORSILLS
CANNOT BE REMOVED WITHOUT DAMAGING THE PART. PLEASE NOTE YOUR CAR WILL
NOT BE DAMAGED IN ANY WAY.
Your new doorsills come to you with a protective liner that you will remove after installation. This will help
produce a nice clean install.
1. Thoroughly clean the surface area first with soap and water then with household isopropyl alcohol.
2. Then swipe the same area with the adhesive promoter (provided). This promoter will guarantee a good
permanent bond.
3. When you are satisfied with the fit, remove the red liner from the attachment tape and firmly press.
IT IS VERY IMPORTANT THAT YOU SLOWLY INSERT THE SILLS INTO PLACE,
KEEPING THE LARGE FLAP AWAY FROM THE CAR. THE ATTACHMENT TAPE IS