American Car Craft Chrysler 300 _ Charger _ Magnum A_C Vent Trim Outer 2Pc Polished_Brushed 2005-2010 - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
CHRYSLER 300/DODGE CHARGER/MAGNUM A/C VENT TRIM 2PC
PART #301003
PARTS INCLUDED:
2-OUTER DASH A/C VENT TRIM
1-ADHESIVE PROMOTER TUBE
GENERAL PART INSTALLATION INSTRUCTIONS
Introduction: In the next few paragraphs we will explain to you what you will need to know and do for a
successful application of ACC Stainless Steel Accessories. It is important to understand that almost all stainless
steel peel and stick accessories need to be pre shaped by hand in order to achieve a nice long term
installation. We realize that all parts are different from each other but as far as the installations of these parts
they all will need to follow the same set of general instructions.
Liner info: Your new accessories will come to you with a protective surface liner. Leave this liner in place until
the installation is complete to prevent finger prints and or possible scratches during installation. This liner is
required to remain on the part until you are instructed to remove it.
DO TO THE MULTI-PIECE DESIGN OF THIS PRODUCT, YOU MUST REMOVE THE RED ADHESIVE BACKING AS
ONE PIECE AND INSTALL IT AS ONE PART. PLEASE CONTACT US WITH ANY QUESTIONS 727.861.1500.