American car craft – American Car Craft Chrysler 300 _ Dodge Charger_Magnum 3.5_5.7_6.1L Shock Tower Cap Set 8Pc Chrome 2005-2010 User Manual
Page 2
2. Apply an appropriate amount of clear 100% silicone into each of the covers and set
them in place over each bolt nut and around the center shock platform. Allow a few
hours to set. NOTE: Because the of the variable height of the shock tower bolts that
attach the shock mounting plate to the shock tower itself it may be necessary to slightly
shim down the tips of the tower bolts. This can easily be done using a shop cut off wheel
to gently grind down the tips of the bolts so that the bolt covers set nicely over each
bolt stud. This may also apply to the main shock bolt. The adjustment if necessary at all
should be very minor and will only take a few minutes.
If any questions occur during installation, please contact
American Car Craft at 727-861-1500.
Thank you and enjoy your new purchase!
AMERICAN CAR CRAFT
18924 SAKERA ROAD-HUDSON FLORIDA 34667
Phone # 727-861-1500 Fax # 727-861-1520