Duro-Last Conductor Head - Manual

DATA SHEET
Conductor Head
“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. Revised 8/12/2012
Description:
The Conductor Head is designed to attach to the wall
below the scupper, leaving the scupper visible from the
ground. It complements the roof design and directs rain
water into downspouts.
Manufactured from various metals (see chart
below).
Standard designed conductors have the same
appearance as the vinyl-back collector.
Commonly ordered with a metal flange scupper,
producing an attractive combination.
Contact Duro-Last ® or EXCEPTIONAL ® Metals to
request a color chart, samples and information
regarding custom metals and finishes.
Installation:
1. Install in accordance with Duro-Last detail
drawing #2071.
2. Any deviation from the requirements set forth in
the detail drawings must be pre-approved, in
writing, by the EXCEPTIONAL Metals Technical
Department.
Warranty:
Duro-Last offers a wide range of warranty coverage for
EXCEPTIONAL Metals products when used with the
Duro-Last roofing system, including paint and finish.
Technical Services:
Product samples, detail sheets, color chips, and color
chart are available for your submittal package. For
assistance with questions or submittals, contact your
local representative or call EXCEPTIONAL Metals.
Material Gauge Finish
Aluminum .032 Mill or Kynar ®
Stainless Steel 24-gauge N/A
Bonderized Steel 24-gauge N/A
Galvalume 24-gauge Mill or Kynar ®
Copper 16 oz. Mill
Shown with metal
flange scupper