Duro-Last Pitch Pan Filler (PPF) User Manual

Data sheet duro-last, Pitch-pan filler (ppf)

Advertising
background image

DATA SHEET

DURO-LAST

®

PITCH-PAN FILLER (PPF)

“Duro-Last”, and “World’s Best Roof” are registered marks owned by Duro-Last, Inc.

11/21/2012

www.duro-last.com 1 of 1

800-248-0280

Description:

Duro-Last

®

Pitch-Pan Filler (PPF) is an easy flowing,

self-leveling sealant for use in pitch-pans. The
sealant is UV and impact resistant, and is formulated
for adhesion to most types of building materials.
Care must be taken since PPF does not adhere to
Kynar

®

coated metal and asphalt materials. The high

tack ensures a weather-tight seal around
penetrations. It is excellent for use in areas
subjected to stress and vibration as well as to
expansion and contraction.

Installation:

1.

Read the MSDS for the product prior to use.

2.

Duro-Last prefabricated vinyl-coated metal
pitch-pans are recommended.

3.

Pitch-pans must be constructed of sheet metal,
wood, PVC pipe or similar, rigid, construction
material.

4.

If a Duro-Last prefabricated vinyl-coated metal
pitch-pan is not being used, a membrane flashing
must be used to flash the pitch-pan. Rectangular
flashings must be terminated with termination bar
or extended into the pitch-pan. Round flashings
may be terminated using stainless steel bands or
extended into the pitch-pan.

5.

The pitch-pan must be clean and dry prior to

adding filler material.

6.

The bulk of the pitch-pan can be filled with

material such as mortar, concrete or insulation. If
there are voids in the fill material, take precaution
to prevent the PPF from migrating through the fill
material.

7.

A minimum depth of ½-inch of sealant is
required.

8.

See detail drawings 4030, 4040 and 4045.

9.

Use mineral spirits for cleanup.

Note:

• This product is only intended for pitch-pan

applications.





Duro-Last Pitch-Pan Filler (PPF)

Item #

1122

Packaging

10.1 fl. oz.

Cartridge

(30 per case)

Volume

Each

cartridge will

fill

approximately

18 cubic

inches.

Texture

Smooth

Color

Gray

Application
Temperature
Range

0 – 120

°

F

Skin Time

20 - 45

minutes

Cure Time

48 - 72 hours

Odor

Mild

Solubility

Insoluble in

water.

Soluble in

most organic

solvents.

Shelf Life

12 months,

unopened.

Store below

80

F.

Advertising