PowerWalker VMWare ESXi 4.0, 4.1, 5.0 - Manual (Page 6)

5
Figure 6.
b. Run “tar ­zxvf VPVMShutdownWizard.tar.gz” command to unzip the compressed file. Refer
to figure 7.
Figure 7.
c. Key in “cd VPVMShutdownWizard” to access the VPVMShutdownWizard catalogue. Then run
“./INSTALL” to install and auto run the software. Refer to figure 8.
Figure 8.
d. After installation , the default path is set to “/vmfs/volumes/datastore1/VPVMShutdown” as
shown in Figure 9.