Peerless-AV MSA-301S - Installation - Manual (Page 2)

ISSUED: 02-09-07 SHEET #: 087-9014-1
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.
2 of 3
Note: some parts may not
appear exactly as illustrated.
PLASMA ADAPTER
Loosen screws on plasma adapter. Then place cross support bracket (A) between plasma adapter and mount.
Tighten screws through cross support bracket to plasma adapter securely. Refer to adapter plate instructions for
installation of screen.
Installation to adapter plate
MOUNT
A
1
Installation of Extension Brackets
Position side extension brackets (B) on both sides of cross support bracket (A) and align hole slots to allow for
desired position of left and right speakers. Loosely attach with eight sets of M5 x 10mm screws and flat washers (E, F).
Do not fully tighten screws to allow for position adjustments when attaching left and right speakers.
Position bottom extension bracket (D) on lower arm of cross support bracket (A), then attach with four sets of M5 x
10mm screws and flat washers (E, F). Do not fully tighten screws to allow for position adjustments when attaching
center speaker.
A
B
B
D
E
F
E
F
2