Peerless-AV HG442-HT3-S - Installation - Manual (Page 5)

ISSUED: 02-28-08 SHEET #: 090-9143-2 04-28-08
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
5 of 7
NOTE: Race assembly (B) and rivet must be in the correct orientation when installing. Rotate bottom of race
assembly (B) until rivet is in the correct position for screen and desired swivel restriction as shown in as shown in
fig. 3.1 and 3.2. Place race assembly (B) onto mounting plate (A) while keeping it in the correct orientation. Attach
race assembly (B) to mounting plate (A) using M5 x 6 mm type F phillips screws (E) as shown in fig. 3.3.
Models: LC-32HT3U, LC-37HT3U Models: LC-42HT3U
120 ° and 60 ° 180 °
180 ° 60 ° and120 °
RIVET
RIVET
RIVET
RIVET
A
B
E
EXAMPLE: RIVET IN
POSITION FOR 180°
SWIVEL RESTRICTION
fig. 3.3
STAND MOUNTING
HOLES STAND MOUNTING
HOLES
B
A
B
A
NOTE: BOTTOM OF
RACE ASSEMBLY
Rivet Location for Swivel Restriction
fig. 3.1 fig. 3.2
3-1