Peerless-AV GC-UNV - Installation - Manual (Page 3)

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.
3 of 13 ISSUED: 01-28-11 SHEET #:125-9176-1
TYPICAL
ADJUSTMENT
INCRAMENT
1
Attaching Adapter Plate to Screen
Attaching adapter plate to screen with
VESA hole pattern:
Choose hole pattern and fasteners shown in detail 2 for
mounting screen with VESA mounting patterns. Hand thread
screws ( N, L or G) through washers (K or H) and adapter
plate ( A) into screen as shown (right). Screw must make at
least three full turns into the mounting hole and fit snug into
place. Securely tighten screws using 4 mm allen wrench ( I).
• If screws don't get three complete turns in the screen
inserts or if screws bottom out and bracket is still
not tightly secured, damage may occur to screen or
product may fail.
WARNING
A
SCREEN
N, L or G
K or H
VESA ® 200 x 100 VESA ® 200 x 200 VESA ® 100 x 100
MOUNTING PATTERNS
M4 x 12 mm screws ( N) with #8
washers ( K) or M5 x 12 mm screws
( L) with #10 washers (H)
M4 x 12 mm screws ( N) with #8
washers ( K), M5 x 12 mm screws (L)
M4 x 12 mm screws ( N) with #8
washers ( K) or
M6 x 12 mm screws ( G) with
#10 washers ( H)
DETAIL 2
Using the hole pattern shown in detail 1, attach the adapter plate ( A) to dedicated adapter plate with four
M10 x 15 mm screws ( E) as shown in figure 1.1. Tighten screws using M10 penta-pin tool (F). If attaching to
articulating mount use M10 x 15 mm screws (supplied with dedicated adapter plate).
DEDICATED
ADAPTER PLATE
DETAIL 1
MOUNTING PATTERN FOR
DEDICATED ADAPTER PLATES
A
E
Figure. 1.1
1
Attaching Wall Plate to dedicated adapter Plate:
1 5/8"