Peerless-AV DS-VW765-LAND - Installation - Manual (Page 10)

10 of 13 ISSUED: 2013-05-13 SHEET #: 145-9011-9 2013-06-25
6
7
Open pull-out mount assembly ( A) by releasing locking tab. Push or pull up on locking tab as shown below.
NOTE: Extended position is for service access only. The mount must be closed during normal use and operation.
Open and Close Pull Out Mount Assembly
A
A
TILT LEFT TILT LEFT
Display cables can be routed through top or bottom of pull-out mount assembly ( A).
NOTE: Use mesh sleeve (M) and cable ties (L) for cable management.
NOTE: Cable ties and cable management slots on pull-out mount assembly (A) can be used to secure display
cables.
Cable Management
DETAIL 3
CABLE MANAGEMENT
SLOTS
LOCKING TAB
LOCKING
TAB
PULL UP
PUSH UP