Peerless-AV CMJ471 - Installation User Manual

Warning, Dc c b a, Mounts

Advertising
background image

ISSUED: 04-30-02 SHEET #: 128-9134-2 08-11-04

Visit the Peerless Web Site at www.peerlessindustries.com

For customer service call 1-800-729-0307 or 708-865-8870.

1

of

2

Attach ceiling plate (A) to steel structure
with four 3/8" - 16 x 2.5" nuts & bolts (C)
and four .406 x .812 x .060 washers (D)
as shown using 9/16" (14 mm) socket
wrench. Tighten bolts so ceiling plate is
firmly attached. DO NOT TIGHTEN
WITH EXCESSIVE FORCE!
Overtight-
ening can cause stress damage to bolts
greatly reducing their holding power!

Snap end caps (B) into place.

D

C

C

B

A

generic steel

structure

From the top, thread the Flush Mount Tube
(included with your Jumbo Mount Bracket) through
the threaded fitting in the ceiling plate (A).

IMPORTANT: If you will install an
extension column DO NOT INSTALL
THE FLUSH MOUNT TUBE. Begin with
step 2.

A

IMPORTANT!

Read entire instruction sheet

before beginning installation and assembly.

Installation and Assembly - OSHPD Ceiling Plate for
Jumbo 2000

®

Mounts

Models: CMJ 471,

CMJ 471W

PARTS LIST

BLACK

WHITE

PART #

PART #

QTY.

DESCRIPTION

A 128-1270

128-2270

1

tapered ceiling bracket

B 2PT-22CA01D

2PT-22CA01F

2

end cap

C 520-1117

520-1117

4

A325 grade 3/8" - 16 x 2.5" nut & bolt

D 540-9407

540-9407

4

.406 x .812 x .060 washer

E 520-9250

520-9250

1

M5 x .8 x 10 mm phillips screw (for use
with extension column if applicable)

A

Note: Actual parts may appear slightly different than illustrated.
IMPORTANT: If using different bolts, the bolts must be A325 grade.

C

B

D

E

MAXIMUM LOAD

CAPACITY:

300 lb (137 kg)

This Ceiling Plate is intended for use only to support Jumbo 2000 Mount TV
Brackets or other products as specified by Peerless Ind, Inc. Fasteners provided
are for attachment to a steel structure as specified by OSHPD.

flush mount tube

(included with Jumbo

Mount Bracket)

R

This product is intended for use with UL
Listed products and must be installed
by a qualified professional installer.

• Installer must verify that the wall will safely support

four times the combined weight of all attached equip-
ment and hardware.

WARNING

Advertising