Peerless-AV DSF290 - Installation - Manual (Page 3)

3 03-13-13 #:125-9414-2 (04-02-13)
ENG - Before installing make sure the supporting truss will support the combined load of the equipment and
hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail.
Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift
and position equipment. This product is intended for indoor use only. Use of this product outdoors could lead to
product failure or personal injury. For support please call customer care at 1-800-865-2112.
WARNING
Symbols
WARNING
#
Skip to step.
x3
Screws must get at
least three full turns
and fit snug.
Do not over tighten screws
Tools Needed for Assembly.
3/8"
(10mm)