Cf c – Peerless-AV ACC845 - Installation User Manual
Page 4
Advertising
ISSUED:12-18-01 SHEET#: 055-9070-3 11-10-04
Visit the Peerless Web Site at www.peerlessindustries.com
For customer service call 1-800-729-0307 or 708-865-8870.
4 of 4
Place one finishing cap (C) on each end of
anti-vibration mount (A).
OPTIONAL:
Place grommet (F) on anti-vibration
mount (A) and place one finishing cap (C) on other
end of anti-vibration mount (A). Route cords through
extension column and out cord management holes
in anti-vibration mount (A).
Note: If using Vector Pro projector mounts, you
will need accessory ACC 800 to route cords
through column.
C
F
C
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
Unistrut
®
is a registered trademark of Peerless Industries, Inc.
Advertising