Peerless-AV PJF2-UNV-S - Sell Sheet - Manual

PJF2 Projector Mount
For Multimedia Projectors up to 50 lb (22 kg)
Vector Pro™ II provides a clean look with its cable management capabilities. The included
extension column connector incorporates internal cable management paths that keep unsightly
cords concealed from view. The mount also features a ceiling plate, ball and socket design,
multidirectional positioning (roll, pitch and yaw) for proper image alignment and preinstalled
security hardware at every connection point. This projector mount is perfect for use in classrooms,
boardrooms, hotels, bars and restaurants or anywhere a projector needs to be mounted. The
Vector Pro™ II can be flush mounted to the ceiling or mounted on the wall. It can also be
mounted using 1-1/2" (38 mm) diameter extension column or 1/2" (38 mm) thread rod.
Includes 1 ½" (38 mm) Internal
Cable Management Access Hole
Model Specific
Adapters Available
Quick image alignment
Single point of adjustment for
quick image allignment
universal compatibility
Includes the Spider ® Universal
Adapter Plate which extends
up to 17.63" (448 mm) to fit most
projector models
Max load: 50 lb (22 kg)
PJF2-UNV(-S)
PJF2-1(S)
 Pre-installed security screws
at all connection points
 Quick- release mechanism
to easily service projector
 Features a 1-1/2" (38 mm)
cable access hole allowing
cables to be routed
through projector mount
out of sight
 Pre-assembled design
reduces installation time
 Structural ceiling plate
included for flush mounting
applications
 Spider ® Universal Adapter
Plate extends up to 17.63"
(448 mm) to fit most
projector models
 Specifications:
Tilt: ±15°
Roll: ±15°
Swivel: 360°
All with positive
lock at any
degree
click: www.peerlessmounts.com call: 800.865.2112 FaX: 708.865.2941
Features
eFFortless projector
maintenance
With its intuitively designed
quick-release thumbscrew that
smoothly unwinds to enable
easy-glide removal of the
projector in and out of the
mount. No tools required.
Tamper Resistant
Hardware