Peerless-AV ACC020 - Installation - Manual

ISSUED: 09-30-02 SHEET #: 055-9109-7 03-11-08
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
1 of 1
Installation and Assembly - Armor Lock Plus ™ Security Cable with lock
Model: ACC020
Parts List
Note: Actual parts may appear slightly different than illustrated.
A
Before you start check the parts list below to make sure all of the parts shown are included.
Wrap cable assembly around extension column and insert lock mechanism through cable loop as shown.
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
Description Qty. Part Number
A cable assembly 1 600-0055
1
Insert key into lock mechanism and set to open position by pushing in key and rotating until hooks are in open position
as shown in figure 2.1.
Note: Key is not removable in open position.
Wrap cable around extension column a few times to reduce slack if needed as shown in figure 2.2. Insert hooks of lock
mechanism into slot on projector, then push in key and turn to lock.
2
fig. 2.1
fig. 2.2
HOOKS IN OPEN
POSITION
LOCK MECHANISM
CABLE LOOP
EXTENSION
COLUMN
SLOT
PROJECTOR MOUNT AND PROJECTOR MAY
APPEAR DIFFERENT THAN ILLUSTRATED.
© 2007, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.