Peerless-AV ACC666 - Installation - Manual

Model: ACC666
Ratchet Tie-Down Belt Use this belt to secure TVs, monitors, and audio/
visual equipment to Peerless Jumbo Carts and
mounting brackets.
Because the size and shape of TVs, monitors, and
audio/visual equipment varies from model to
model it is up to the installer to determine the best
method of belting the equipment to the TV stand,
cart or bracket.
Peerless Industries, Inc. For customer service call
1980 Hawthorne Avenue 1-800-729-0307 or
Melrose Park, IL 60160 708-865-8870
Pump ratchet handle to tighten belt. For secure
hold, ratchet reel must have at least two layers
of belt around it.
Note: Too many layers of belt around ratchet
reel will cause it to jam. To avoid this problem
be sure to remove ALL slack from belt before
pumping ratchet handle.
After belt is tight, close ratchet handle.
To release, compress release bar and open
ratchet handle 180
O .
Wrap belt around TV or monitor and mounting
surface. Insert end of belt through ratchet reel
and pull until ALL slack is out of belt.
belt
belt
Insert belt under,
behind, then through
ratchet reel.
ratchet reel
ratchet
handle
release bar
ISSUED: 11-14-96 SHEET #: 016-9001 REV: A 1-5-98
1 of 1
Visit the Peerless web site at www.peerlessindustries.com.
© 2001 Peerless Industries, Inc. All rights reserved.
Peerless is a trademark of Peerless Industries, Inc.