Peerless-AV ACC320 - Installation - Manual

ISSUED: 01-24-07 SHEET #: 120-9028-4 11-05-07 1 of 1
© 2007 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
A
C
CART
DESCRIPTION QTY. PART #
A cord wrap - clip 1 009-1023
B 20' extension cord 1 600-1006
C M5 x 12mm phillips head pan screw 2 520-1027
For customer care call 1-800-729-0307 or 708-865-8870. Visit the Peerless Web Site at www.peerlessmounts.com.
Attach cord wrap (A) to cart base using two M5 x 10 mm phillips head pan screws (C) as shown. Tighten
securely.
NOTE: Cord wrap does not hook into base.
Next press extension cord (B) into center of mounting clip (A) as shown in fig. 1.1.
Wrap extension cord (B) around cord wrap (A) as shown in fig. 1.2.
Installation and Assembly - Electrical Outlet Strip with
Cord Wrap
Models: ACC 320
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
Before you start make sure all parts shown below are included with your product.
Note: Some parts may appear slightly different than illustrated.
Parts List
B
A
C
B
A
cord
wrap
A
B
Fig. 1.1
Fig. 1.2