Peerless-AV WSP445 - Installation - Manual (Page 3)

ISSUED: 12-06-95 SHEET #: 024-9001-3 11-30-06
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
3 of 4
D
Rotate toggler
clockwise to
wedge it
against inside
walls of metal
stud.
Push into
hole.
Pivot end of
toggler.
Slide plastic
cap forward
while pulling
back firmly on
ring.
Break off
excess.
D
∅ 1/2"
(13 mm)
FOR METAL STUD WALLS ONLY: Drill four
1/2" (13 mm) dia. holes through drywall and
studs. Insert togglers (D) as shown below...
Steps 3 and 4 cover attachment to a metal stud wall. For attachment to a wood stud wall skip to step 5, page 4.
• Make sure that mounting screws are anchored into the
center of the studs. The use of an "edge to edge" stud
finder is highly recommended.
WARNING