Peerless-AV PWA-14W - Installation - Manual (Page 5)

ISSUED: 03-19-03 SHEET #: 017-9011-4 06-13-07
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
5 of 6
∅ 1/2"(13 mm)
Push into hole.
Drill 1/2" (13 mm) dia. holes through drywall and
stud. Insert togglers (call customer service to order
accessory kit ACC 415) as follows.
Important: Product must be mounted through
drywall that has a minimum thickness of 1/2" and
into metal studs, 26 gauge or heavier.
Pivot end of toggler.
Slide plastic cap forward while pulling back firmly on ring.
Snap off as shown.
Attach wall arm with 1/4-20 phillips
screws.
toggler
Installation to a metal stud wall
A
• Product must be mounted through drywall that has a
minimum thickness of 1/2" and into metal studs, 26
gauge or heavier.
WARNING
1/4-20 x 2.5"
phillips screw