Peerless-AV SP850-V2X2 - Installation - Manual (Page 10)

10 of 10 ISSUED: 01-17-12 SHEET #: 125-9277-1
Roll can be adjusted 1° clockwise or
counterclockwise.
To adjust roll, loosen screen fasteners slightly,
leaving them snug. Level screen, then tighten screen
fasteners.
NOTE: When adjusting roll, screws should be
retightened as indicated in step 4.
Optional: To lock one sliding arm of mount in place,
slide locking tab ( B) over top or bottom of sliding arm
and attach to mount using one M5 x 10 mm screw
( AA) and one spacer (C).
Note: Screen not shown for clarity.
10
SLIDING ARM
B
C
AA
9
SCREEN FASTENER