Peerless-AV MIS660 - Installation - Manual

ISSUED: 09-08-08 SHEET #: 125-9014-2
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
1 of 2
Qty. Part #
A M5 x 25 mm socket pin serreated washer head screw 4 510-1122
B M6 x 20 mm socket pin serreated washer head screw 4 510-9554
C 5/32'' (4mm) security allen wrench 1 560-9646
D # 10 washer 4 540-9400
E M6 x 8 mm socket pin screw 4 520-1255
Parts List
Description
Slide screen onto base until holes align as shown in figure 1.1. Attach screen to stand using four M5 x 25 mm
socket pin serrated washer head screws (A) and flat washers (D) as shown in figure 1.2. Tighten with 4 mm security
allen wrench (C).
D C
Model: MIS660
Some parts may appear slightly different than illustrated.
A
Before you start make sure all parts listed are included with your product.
This product is UL Listed. It
must be installed by a qualified
professional installer.
R
IMPORTANT! Read instruction sheet before you start installation and assembly.
• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb (30-40 kg • cm).
WARNING
B
fig 1.1
fig 1.2
Installation and Assembly - Neck Security Fas-
tener Pack for Philips Display Models:
26HFL5830D/27, 32HFL5860D/27, 37HFL5560D/27,
42HFL7580A/27, 42HFL5860D/27, 52HFL5580D/27
A
D
Stand for 26" and 32" Screens
E