Peerless-AV ACC328 - Installation - Manual (Page 2)

ISSUED: 10-08-09 SHEET #: 120-9071-2 11-05-09
Visit the Peerless Web Site at www.peerlessmounts.com
2 of 2
1
Attaching edging to Laptop Shelf
FIGURe 2.1
FIGURe 2.2
A
F
G
e
e
ARM PLATE
A
ARM PLATE
B
FIGURe 1.1
Remove protective backing from plastic cover ( B). Adhere plastic cover (B) to the arm plate of the desktop mount
(sold separately) while keeping the holes aligned as shown in figure 2.1. Slide laptop shelf ( A) down, over the back
of the arm plate as shown in figure 2.1. Secure laptop shelf to arm plate with four screws ( F), eight washers (e)
and four nylock nuts ( G) as shown in figure 2.2.
Attach rubber edging ( D) to laptop shelf (A) as shown in figure 1.1. Attach plastic edging (C) to laptop shelf as
shown in figure 1.2. Note: Plastic edge (C) may already be attached.
C
FIGURe 1.2
D
2
Attaching Laptop Shelf to Arm Plate
Make sure
holes are
aligned
A
© 2009, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless Industries, Inc.
3215 W. North Ave.
Melrose Park, IL 60160
www.peerlessmounts.com
• Desktop mount arm springs under tension. Must
adjust to weight of laptop.
WARNING