Peerless-AV ACC559 - Installation - Manual

ISSUED: 05-06-99 SHEET #: 128-9021-2 03-24-06
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 1
A
B
PART # QTY. DESCRIPTION
A 128-1187 1 tray (ACC559)
128-1190 1 tray (ACC558)
B 128-1189 2 clamp for I-beam
C 520-9215 4 carriage bolt 3/8-16 X 3/4
D 520-2560 4 cone bolt 3/8-16 X 2
E 530-9310 4 lock nut 3/8-16
F 540-9454 4 flat washer 3/8 x 3/4 x 1/8
G 520-9250 2 M5 x .8 x 10mm phillips screw
M5 screws (G) are provided to secure extension column (sold
separately) to threaded fitting in tray. Refer to extension column
instruction sheet for details.
For customer service call 1-800-729-0307 or 708-865-8870. Visit the Peerless Web Site at www.peerlessindustries.com.
IMPORTANT! Read entire instruction sheet before
you start installation and assembly.
Before you start make sure
all parts shown below are
included with your product.
Installation and Assembly - I-Beam Clamps
Models:
ACC558
ACC559
Peerless Industries, Inc.
3215 W. North Avenue
Melrose Park, IL 60160
Parts List
Note: Some parts may appear slightly different than illustrated.
C
D
E
F
Note: For each step see corresponding illustration.
Attach clamps (B) to tray (A) using four 3/8-16 x 3/4 carriage
bolts (C), washers (F), and lock nuts (E). Do not fully tighten.
Start four 3/8-16 x 2 bolts (D) into clamps (B).
Adjust clamps (B) securely around I-Beam. Tighten (C,F,E)
securely. Tighten four bolts (D) securely. Attach the exten-
sion column according to the instructions provided with it.
Use a level to make sure the column is plumb and make
adjustments as necessary.
B
D
I-Beam
4" (102 mm) or 5" (127 mm)
adjustment range
G
B
Maximum load rating 250 lbs. (113 kg) Com-
bined weight to all attached hardware and
components is not to exceed 250 lbs. (113 kg)
This product must be
installed by a qualified,
professional installer.
R