Bd a c – Peerless-AV ACC324 - Installation User Manual
Page 2
2 of 3
ISSUED: 08-25-08 SHEET #: 120-9056-1
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
NOTE: If attaching shelf (A) to top side of corner mount, remove fasteners and support brackets
from top side. If attaching shelf (
A) to inside bottom of corner mount, remove fasteners and support
brackets from bottom side.
Remove top sets of 1/4-20 x 1" round phillips head screws, 1/4" flat washers
and 1/4-20 flanged serrated locknuts as shown below.
Center shelf (
A) onto corner mount and align with front hole slots. Replace screw, washer and nut combination to
front and rear hole slots as shown.
NOTE: When reattaching support bracket, be sure flange faces downward and
slot faces front.
NOTE: When wall plates of corner mount are 20" from the corner of the wall, fasten one 1/4-20 x 1" round phillips
head screw (
B) one 1/4" flat washer (D) and one 1/4-20 flanged serrated locknut (C) through slot of support bracket
as shown below.
1
2
Round phIllIpS heAd SCReW
Round phIllIpS heAd SCReW
FlAT WASheR
FlAT WASheR
FlAnged SeRRATed loCknuT
FlAnged SeRRATed loCknuT
FlAnge
SloT
B
D
A
C
Attaching Shelf to Inside Bottom of Corner Mount
BACK VIEW