Peerless-AV ACC850_S - Installation - Manual

ISSUED: 01-08-03 SHEET #: 055-9142-4 10-29-04
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 1
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Model ACC 850 Model ACC 850S
DESCRIPTION QTY. PART # PART #
A extension column connector w/ 1 580-1025 580-4025
cord management
B 10-32 x 3/8" socket pin screw 2 520-1084 520-2084
C 10-32 x 3/8" phillips head screw 2 520-1130 520-2130
D 10-32 x 3/16" slotted set screw 2 520-1187 520-2187
Installation and Assembly - Extension Column Connector with Cord
Management to be used with PJF, PJC, 8008506, and 8006999 Series
Models: ACC 850,
ACC 850S
Some parts may appear slightly different than illustrated.
IMPORTANT! Read entire instruction sheet
before you start installation and assembly.
Screw extension column connector (A)
to extension column (sold separately).
Align slot in extension column with one
of the top holes in extension column
connector (A). Insert and tighten one 10-
32 x 3/8" phillips screw* (C) through
extension column connector (A) into slot
on extension column using security allen
wrench (provided with PJF 1 or PJF 1-S).
See detail 1.
Screw Vector Pro ™ Plus PJF 1 or PJF 1-
S (sold separately) to extension column
connector (A). Align slot in Vector Pro
Plus to one of the bottom holes in
extension column connector (A). Insert
and tighten one 10-32 x 3/8" phillips
screw* (C) through extension column
connector (A) into slot in Vector Pro
Plus
using security allen wrench (provided
with Vector Pro
Plus). See detail 2.
Thread cords through top of extension
column and pull cords through hole in
cord management adapter (A) as shown
below. Note: Make sure cords are
long enough to reach back of projec-
tor and not binding.
A
B
Vector Pro Plus
(Sold Separately)
A
A
Parts List
slot
A
Extension Column
DETAIL 1
slot
B
Vector Pro Plus
(Sold Separately)
DETAIL 2
Before you start make sure all parts listed are included with your product.
R
This product is intended for use with UL
Listed products and must be installed
by a qualified professional installer.
C
C
or
B C
or
Extension Column
(UL listed EXT or
ADJ Series)
Sold Separately
D
D
D
*Use 10-32 x 3/8" phillips head screws
(C) for standard installations, or 10-32 x
3/8" socket pin screws (B) for
installations where additional security is
desired.
Note: Slotted set screws (D) are used to
jam against the threads of each
connecting joint to prevent any excess
movement. Do not overtighten screws;
overtightening screws will damage
threads making it difficult to separate the
products.