Peerless-AV PLP-V6X4 - Installation - Manual

ISSUED: 11-21-07 SHEET #: 202-9262-1
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 1
Parts List
Description qty. part#
A adapter plate 1 200-1829
B M5 x 12 mm socket pin serrated washer head screw 4 510-1064
C M5 x 10 mm socket pin screw 4 520-1063
D 4 mm allen wrench 1 560-9646
E M6 x 20 mm socket pin serrated washer head screw 4 510-9554
F M6 x 12 mm socket pin serrated washer head screw 4 510-1050
G M8 X 25 mm socket pin screw 4 520-1101
H spacer 4 540-1015
I #10 washer 4 540-9400
Model: PLP V6X4
Some parts may appear slightly different than illustrated.
A
Before you start make sure all parts listed are included with your product.
This product is UL Listed. It
must be installed by a qualified
professional installer.
R
IMPORTANT! Read instruction sheet before you start installation and assembly.
D
• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb (30-40 kg • cm).
WARNING
B
C
Screen may appear slightly different than illustrated
Installation and Assembly - Adapter Bracket for VESA ®
600 x 400 Screens
E
F G
H
Begin with shortest length screw (B, F or G),
hand thread through adapter plate into screen as
shown below. Screw must make at least three
full turns into screen insert and fit snug into
place. Do not over tighten. If screw cannot make
three full turns into screen insert, select a longer
length screw (E). Repeat for remaining holes. If
you have any questions, please call Peerless
customer care at 1-800-865-2112.
NOTE: Spacer (H) is only to be used with
M8 x 25 mm socket pin screw (G). #10 washer
(I) is used with M5 x 12 mm socket pin screw
(B) only.
B, E, F or G
H
© 2007, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
A
Used with specific
mounts only
I
I