Warning, Parts list j, Tools needed for assembly – Peerless-AV ACC953 - Installation User Manual
Page 2
2 of 14
ISSUED: 09-26-11 SHEET #: 120-9123-4 07-12-12
NOTE: Read entire instruction sheet before you start installation and assembly.
Tools Needed for Assembly
• phillips screwdriver
• level
• utility knife
• adjustable wrench
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact
your local distributor.
• This product should only be installed by someone of good mechanical aptitude, has experience with basic building
construction, and fully understands these instructions.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
• Never exceed the Maximum Load Capacity. See page one.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
• This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal
injury.
WARNING
Before you begin, make sure all parts shown are included with your product.
E
B
A
C
D
F
H
G
I
Parts may appear slightly different than illustrated.
Description
Qty. Part #
A
horizontal bracket
2
125-1259
B
shelf
2
125-1279
C
mount bracket
2
125-1266
D
adjustment bracket
2
125-1267
E
washer
14
540-9400
F
nut
4
530-1019
G
cover
2
125-1274
H
left cap
2
125-1275
I
right cap
2
125-1276
J
M5 x 10mm self tapping screw
10
520-9250
Parts List
J