Peerless-AV ACC322 - Installation - Manual

ISSUED: 06-19-07 SHEET #: 120-9036 -2 2-27-08 1 of 1
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
Description Qty. Part #
A safety belt 1 1PM-99TD01P (fast pack 083-8012)
Parts List
Installation and Assembly - Safety Belt Accessory Model: ACC322
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
Before you start make sure all parts shown below are included with your product.
Note: Some parts may appear slightly different than illustrated.
A
© 2007, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Wrap safety belt (A) around component and mount as shown in figure 1.1. Position belt close to the back of the
component being secured (in line with the back feet) as shown in figure 1.2.
Insert loose end of safety belt into the buckle end as shown in figure 1.3. Pull to tighten securely.
1
fig 1.1
fig 1.2
fig 1.3
MOUNT (SOLD SEPARATELY)
MODEL PS200 SHOWN
GENERIC COMPONENT
A
A
A
GENERIC COMPONENT