Peerless-AV WSP756 - Installation - Manual (Page 5)

5 of 7 ISSUED: 09-07-10 SHEET #: 024-9015-2 12-20-11
Refer to instruction manual provided with wall mount (sold separately) to determine screen center.
Determine correct mounting plate pattern shown below. Place template (wall plates) on wall, level, and mark the
center of four mounting holes per wall plate (A). NOTE: For SA752 models, the top of the wall plate will be 9.5"
above the screen center. For SA761, SA763, and SA771 models, the top of the wall plate will be 12.75" above the
screen center.
Drill eight 5/32" pilot holes then drill eight 1/2" holes through drywall and metal studs.
2
SA752 WALL PLATE
CONFIGURATION
SA761, SA763, SA771
WALL PLATE CONFIGURATION
DETAIL 1
14.50"
9.5"
CS
CS = center of screen
18.00"
12.75"
CS
• Make sure that togglers are anchored into the center of the studs as shown in detail 1. The use of an "edge to edge"
stud fi nder is highly recommended.
WARNING