Peerless-AV ADD101-110 - Installation User Manual
Warning, Part list c a a
ADD101, ADD102,
ADD103, ADD104,
ADD105, ADD106,
ADD107, ADD108,
ADD109, ADD110
IMPORTANT! Read entire instruction sheet
before beginning installation and assembly.
Installation and Assembly - Fixed Length Extension Columns
Models:
Remove plug used for shipping from pipe (A). Align holes to desired length, then fasten with a M10
carriage bolt (B) and M10 lock nut (C).
Insert extension column to I-Beam Clamp. Align holes to desired length, then fasten with a M10
carriage bolt (B) and M10 lock nut (C).
Follow directions supplied with mounting bracket for attaching to threaded end of column. Align slot
with one hole inside of threaded fitting. Lock extension column with one M5 x .8" x 10mm phillips
screw supplied with mount column attaches to.
I-Beam Clamp
I-Beam Clamp
B
ISSUED: 06-30-00 SHEET #: 154-9003-3 10-26-04
Visit the Peerless Web Site at www.peerlessindustries.com
For customer service call 1-800-729-0307 or 708-865-8870.
1 of 1
Note: Other ceiling decouplers
may be used if mounted to a
structure other than an I-Beam
(Call Customer Service for more
information).
A Pipe (ADD101)
1
154-1079
Pipe (ADD102)
1
154-1080
Pipe (ADD103)
1
154-1081
Pipe (ADD104)
1
154-1082
Pipe (ADD105)
1
154-1083
Pipe (ADD106)
1
154-1084
Pipe (ADD107)
1
154-1085
Pipe (ADD108)
1
154-1086
Pipe (ADD109)
1
154-1087
Pipe (ADD110)
1
154-1088
B M10 x 60mm carriage bolt
2
580-1022
C M10 center lock nut
2
530-9402
Description
Qty.
Part #
Part List
C
A
A
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
B
C
• For a safe installation be sure to lock extension
column as instructed.
WARNING
• For safety, extension column must be locked to
threaded fitting with screw!
WARNING