Sv u t – Peerless-AV SR1G - Installation User Manual
Page 5
5 of 13
ISSUED: 01-10-07 SHEET #: 009-9033-12 01-11-11
Insert right leg (T) into base housing (E) as shown in fi g.1.1. Then line up holes of right leg with holes in bas
housing (E). Fasten base housing to right leg using
two 3/8-16 x 1.5" bolts (X)
and two joint connectors (W), tighten
using 3/16
"
allen wrench (BB) and 7/32
"
allen wrench
(P) as shown in fi g.1.2.
NOTE: Left and right legs can be identifi ed by looking at the cart from the front.
Repeat for left side with left leg (S).
1
T
X
fi g. 1.2
W
fi g. 1.1
E
T
FRONT OF CART
FRONT OF LEG
2
I
nsert casters (
V & U
) into holes of support legs (
S & T
) and hand thread to secure. Attach casters with brake
(V
)
to the back of left and right support legs (
S & T
). Attach casters without brake (U) to front of support legs (
S & T
) as
shown.
NOTE: Lock brakes on casters, for no sudden movements during installation.
S
V
U
T
HAND THREAD
HOLD WHEEL