Sena Bluetooth SPH10H-FM v4.3 User's Guide User Manual
User's guide
Advertising
Table of contents
Document Outline
- 1. INTRODUCTION
- 2. PACKAGE CONTENTS
- 3. INSTALLING THE SPH10H-FM ON YOUR HELMET
- 4. POWERING ON/OFF AND CHARGING
- 5. VOLUME ADJUSTMENT
- 6. PAIRING THE SPH10H-FM WITH BLUETOOTH DEVICES
- 7. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE
- 8. INTERCOM PAIRING
- 9. SPH10H-FM CONFIGURATION SETTING
- 9.1 Assigning Speed Dial
- 9.2 Enabling/Disabling Voice Activated Phone Answering
- 9.3 Enabling/Disabling Voice Activated Intercom
- 9.4 Enabling/Disabling Voice Prompts
- 9.5 RDS AF setting (Radio Data System: Alternative Frequencies) (Factory Default: Disabled)
- 9.6 Delete All Bluetooth Pairing Information
- 9.7 Exit Voice Configuration Menu
- 10. FUNCTION PRIORITY
- 11. STEREO MUSIC
- 12. MOBILE PHONE CALL MAKING AND ANSWERING
- 13. TWO-WAY INTERCOM
- 14. THREE-WAY CONFERENCE INTERCOM
- 15. FOUR-WAY CONFERENCE INTERCOM
- 16. MUSIC SHARING
- 17. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- 18. INTERCOM FAILURE
- 19. INTERCOM RECONNECTION
- 20. FM RADIO
- 21. RESET TO FACTORY DEFAULT SETTINGS
- 22. FAULT RESET
- 23. FIRMWARE UPGRADE
- 24. SENA BLUETOOTH CONNECTION CASE STUDIES
- 25. OPERATION QUICK REFERENCE
- BATTERY INFORMATION
- MAINTENANCE AND CARE
- DISPOSAL
- CERTIFICATION AND SAFETY APPROVALS
- WAIVER AND GENERAL RELEASE
- WARNING