Technical data, Installation, Closing the door – AEG SKS68240F0 User Manual

Page 33: Positioning, Electrical connection

Advertising
background image

8.

Open the door. Make sure that the lamp comes on.

Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to "Installation".

3.

If necessary, replace the defective door gaskets. Contact the Service Center.

TECHNICAL DATA

Dimension

Height

815 mm

Width

596 mm

Depth

550 mm

Rising Time

13 h

Voltage

230-240 V

Frequency

50 Hz

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

INSTALLATION

WARNING!

Read the "Safety Information" carefully for your safety and correct operation of the appli-

ance before installing the appliance.

Positioning

This appliance can be installed in a dry, well ventilated indoor (garage or cellar) also, but for

optimum performance install this appliance at a location where the ambient temperature

corresponds to the climate class indicated on the rating plate of the appliance:

Climate class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate corre-

spond to your domestic power supply.

Technical data

33

Advertising
This manual is related to the following products: