Sena Bluetooth SMH10 v5.0 User's Guide - Manual (Page 23)

SMH10
24
You can listen to stereo music in two ways: with the enclosed stereo
audio cable or by Bluetooth wireless stereo.
11.1 By Stereo Audio Cable
Plug your stereo MP3 player directly to the SMH10 by using the
enclosed 3.5mm stereo audio jack cable. To adjust the volume, rotate
the Jog Dial on the headset. You may adjust the volume on the MP3
player also.
MP3 Jack
11.2 By Bluetooth Wireless Stereo
The Bluetooth audio device must be paired with the SMH10 by following
the “Bluetooth Stereo Device Pairing” procedures described in the
6.3 chapter. The SMH10 supports the Audio/Video Remote Control
11. STEREO MUSIC
Profile (AVRCP), so if your Bluetooth audio device also supports the
AVRCP, you can use the SMH10 to remotely control music playback.
You not only can adjust the volume but also use the functions such as
play, pause, next track and previous track.
1. To adjust the volume, rotate the Jog Dial.
2. To play or pause music, press and hold the Jog Dial for 1 second
until you hear a double beep.