KIA Amanti 2004 - Manual (Page 283)

Maintenance
46 7
1
2
3
4
5
6
7
8
9
2. Remove the service cover by turn-
ing the plastic screw counterclock-
wise and removing the cover.
3. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
4. Remove the bulb from the socket
by pressing it in and rotating it until
the tabs on the bulb align with the
slots in the socket. Pull the bulb
out of the socket.
5. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
6. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
7. Replace the service cover and
tighten the screw.
1GHA430 1GHA429 1GHA501
Opirus CAN 7-1.qxd 7/8/03 2:26 PM Page 46