KIA Rio_Rio5 2005 - Manual (Page 71)

3-61
• To remove the cap, turn it counterclockwise.
• To install the cap, turn it clockwise until it “clicks.’’
This indicates that the cap is securely tightened.
✻ ✻
NOTICE
A loose fuel filler cap may cause the OBD-II
Malfunction Indicator Light (
) light in the
instrument panel to illuminate unnecessarily.
Always ensure that the fuel filler cap is tight.
CHECK CHECK
The fuel filler neck is designed to prevent filling the
fuel tank with anything but unleaded fuel.
If the fuel filler lid will not open in cold weather
because the area around it is frozen, push or lightly tap
the lid.
✻ ✻
NOTICE
If the fuel filler cap requires replacement, use
only a genuine Kia cap. An incorrect fuel filler
cap can result in a serious malfunction of the fuel
system or emission control system. Correct
replacement caps are available at Authorized Kia
Dealers.
✻ ✻
NOTICE
Do not spill fuel on the exterior surfaces of the
vehicle. Any type of fuel on painted surfaces may
damage the paint.
AS2B03046A
Remove Install
Fuel filler
neck
RIO ENG CNA 3.qxd 7/29/05 5:13 PM Page 61