AEG HC411520GB - Manual (Page 36)

340 +1 mm
490 +1 mm
R 5mm
55mm
min.
30 mm
min. 20 mm
• Seal the gap between the worktop and glass ceramic with silicone.
• Put some soapy water on the silicone.
• Pull off the excess silicone with the scraper.
The installation of more than one appliance
Added parts:connection bar(s), heat resistant silicon, rubber shape, sealing strap.
Only use special a heat - resistant silicon.
The worktop cut out
Distance from the wall : minimum 50 mm
Depth : 490 mm
Width : sum widths of all the appliances to be built-in and subtract 20 mm (see also "Over-
view of all appliance widths" )
Example :
580 mm
520 mm 490 mm
360 mm
+ - =
20 mm 920 mm
The installation of more than one appliance
1.
Put down the dimension of the worktop cut out and saw it out.
36 Installation